Focal FPX5.120

Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space. The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs.

To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to.

Product highlights:
5-Channel Class D Amplifier
75W RMS x 4 + 420W x 1 @ 4 ohms
120W RMS x 4 + 720W x 1 @ 2 ohms
Bridged mode (Ch 1-4 bridged at 4 Ohms + Ch 5 at 2 Ohms): 240W RMS x 2 + 720W RMS
Audio Mos-Fets – Optimized efficiency
Low Pass Filter Ch 1-4: 50Hz-500Hz
Ch 5 (Subwoofer) – Subsonic Filter (High-pass): 10Hz-50Hz+
Ch 5 (Subwoofer) – Low-pass filter: 50Hz-250Hz
Ch 5 Bass Boost: (0/12dB)
Dimensions: 13.25″ x 6.8″ x 2.25″ (337 x 175 x 57mm)

What’s in the box:
5 Channel Amplifier
FPX Remote Control
16.5′ Remote control cable (RJ14 modular plugs on both ends)
2mm Allen wrench
4mm Allen wrench
Four M4 x 65mm Allen-head screws
2 Self-tapping screws (M4 x 15mm)
User Manual